Cleanroom Swab_EM-FS751

▪ EM-FS751, Kleentips Anti-static Cleanroom Swab is constructed from compressed, 100 ppi (Z) open-cell polyurethane foam that is free from organic contaminants such as silicone, amides or phthalate esters. The foam is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an ISO Class 4 Cleanroom, the foam exhibits low particulate and ionic content. It has excellent compatibility with most common solvents including acetone as well as excellent sorbency and solvent-holding capacity. ▪ The foam head is compressed and possesses good firmness. The pointed, non-abrasive foam head is designed for cleaning small, slotted areas. ▪ The swab handle is ESD-safe and is made from polypropylene. The handle is compact and will not contribute to particulate or organic contamination. Designed for general purpose cleaning, EM-FS751 Anti-static Cleanroom Swabs are the ideal swabs to use in cleaning static sensitive components or parts

Cleanroom Swab_EM-FS751

▪  EM-FS751, Kleentips Anti-static Cleanroom Swab is constructed from compressed, 100 ppi (Z) open-cell polyurethane foam that is free from organic contaminants such as silicone, amides or phthalate esters. The foam is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an ISO Class 4 Cleanroom, the foam exhibits low particulate and ionic content. It has excellent compatibility with most common solvents including acetone as well as excellent sorbency and solvent-holding capacity.

▪  The foam head is compressed and possesses good firmness. The pointed, non-abrasive foam head is designed for cleaning small, slotted areas.

▪  The swab handle is ESD-safe and is made from polypropylene. The handle is compact and will not contribute to particulate or organic contamination. Designed for general purpose cleaning, EM-FS751 Anti-static Cleanroom Swabs are the ideal swabs to use in cleaning static sensitive components or parts


FeaturesESDMAN - Leading Supplier of ESD Tester, Grounding Monitor and Ionization

▪  Free from silicone, amide and DOP

▪  Low non-volatile residue

▪  Low in both particles and ion content

▪  Excellent solvent-holding capacity

▪  Compatible with most common solvents

▪  No contaminating adhesives or coatings


Applications

▪  Micro-mechanical cleaning

▪  Remove contamination from disk drives

▪  Effectively clean small, hard to reach areas with solvents such as IPA

▪  Remove flux residue and excess materials

▪  For general purpose cleaning


Physical Characteristics

PropertyDescription / Typical Values
Foam Head100 ppi (Z) open cell
Foam BondThermally bonded
HandlePolypropylene
Handle Length51.0 mm
Handle Diameter2.4 mm
Total Swab Length66.0 mm


Contamination Characteristics

Particles, Readily releasable
Particles 0.5 um<6000 counts/swab
Non-volatile Residue
DI Water≤ 0.15 mg/swab
IPA≤ 0.40 mg/swab
Ion Content
Chloride≤ 0.90 ug/swab
Sulphate≤ 0.40 ug/swab
Total Anions≤ 1.30 ug/swab
Organic Contamination
No detectable silicone oil, amide or DOP.


ESD Characteristics

ESD Characteristics
Handle Resistivity 10×10e10 Ohms/Sq