Cleanroom Swab_EM-PS758L

▪ EM-PS758L Anti-static Cleanroom Swab is constructed from Single-layer knitted polyester that is free from organic contaminants such as silicone, amides or phthalate esters. The cloth is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an ISO Class 4 Cleanroom, the polyester exhibits low particulate and ionic content. It has excellent compatibility with most common solvents including acetone as well as excellent absorbency and solvent-holding capacity. ▪ The head is designed for cleaning small, slotted and recessed areas. The excellent cleaning is controlled and supported flexible Paddle. ▪ The swab handle is ESD-safe and is made from polypropylene. The handle is compact and will not contribute to particulate or organic contamination. Designed for general purpose cleaning, EM-PS758L Anti-static Cleanroom Swabs are the ideal swabs to use in cleaning static sensitive components or parts.

Cleanroom Swab_EM-PS758L

▪  EM-PS758L Anti-static Cleanroom Swab is constructed from Single-layer knitted polyester that is free from organic contaminants such as silicone, amides or phthalate esters. The cloth is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an ISO Class 4 Cleanroom, the polyester exhibits low particulate and ionic content. It has excellent compatibility with most common solvents including acetone as well as excellent absorbency and solvent-holding capacity.

▪  The head is designed for cleaning small, slotted and recessed areas. The excellent cleaning is controlled and supported flexible Paddle.

▪  The swab handle is ESD-safe and is made from polypropylene. The handle is compact and will not contribute to particulate or organic contamination. Designed for general purpose cleaning, EM-PS758L Anti-static Cleanroom Swabs are the ideal swabs to use in cleaning static sensitive components or parts.


FeaturesESDMAN - Leading Supplier of ESD Tester, Grounding Monitor and Ionization

▪  Free from silicone, amide and DOP

▪  Low non-volatile residue

▪  Low in both particles and ion content

▪  Excellent solvent-holding capacity

▪  Compatible with most common solvents

▪  No contaminating adhesives or coatings


Applications

▪  Micro-mechanical cleaning

▪  Remove contamination from disk drives

▪  Effectively clean small, hard to reach areas with solvents such as IPA

▪  Remove flux residue and excess materials

▪  For general purpose cleaning


Physical Characteristics

PropertyDescription / Typical Values
Head MaterialllSingle Knitted Polyester
Head BondThermally bonded
Head Width3.2mm
Head Thickness2.2mm
Head Length10.0mm
Handle MaterialPolypropylene
Handle Width2.2mm
Handle Length60.0 mm
Total Swab Length70.0 mm



Contamination Characteristics

Particles, Readily releasable
Particles 0.5 um<3000 counts/swab
Non-volatile Residue
DI Water≤ 0.11 mg/swab
IPA≤ 0.27 mg/swab
Ion Content
Chloride≤ 0.05 ug/swab
Sulphate≤ 0.26 ug/swab
Total Anions≤ 0.31 ug/swab
Organic Contamination
No detectable silicone oil, amide or DOP.



ESD Characteristics

ESD Characteristics
Handle Resistivity 10×10e10 Ohms/Sq