Antistatic POM Sheet - Black

Product

ESD Access Control System
Measurement
Resistance Meters Static Field Meter Body Voltage Meter Electrostatic Voltmeter
Personnel Grounding Testers
Wrist Strap and Footwear Wrist Strap
Calibration Tools
Continuous Monitors
Single Wire Workstation Dual Wire Workstation Monitors Grounding System Monitor
Ionization
Steady State DC Ionizer High Frequency AC Ionizer Pulsed AC Ionizer DC Ionizer Power Frequency AC Ionizer Pulsed DC Ionizer
Grounding Accessories
Antistatic Gloves Foot Grounder Wrist Strap Grounding Cords Earth Grounding Plug Studs and tool ESD Garments ESD PU Foam Chair Electrotherapy Series Product
ESD Bench and Floor Mats
ESD Table Mat ESD Anti-Fatigue Floor Mat ESD Floor Mat and Tacky Mat ESD Field Service Kit ESD PVC Tile and Inter-locking Tile ESD PVC Curtain
ESD Packagings
Corrustat Box
Black Antistatic Chip Boxes Black Antistatic Transit Boxes Black Conductive Bin Boxes & Reel Storage Black Antistatic Component Boxes Black Conductive Inplant Handlers Black Conductive Bin Boxes Black Conductive Foam Tray
Other Consumables
ESD Tape ESD Safe Magnifier Lamp ESD Vacuum Cleaner Antistatic Stainless Steel Tweezers High Precision Stainless Steel Tweezers Cleanroom Swab ESD Keyboard ESD Broom and Dustpan ESD Scissors ESD Pen ESD 3 Layers Document Tray ESD Document Holder ESD Clip Board Antistatic Waste Bins Disposable Bouffant Cap

Antistatic POM Sheet_Black

Antistatic POM Sheet_Black

Antistatic POM Sheet_Black

Antistatic Polyoxymethylene (POM) Sheet:

Reinforced Toughness, Permanent Antistatic

Black Color, Extrusion Grade

Specification:

Item	Testing Method	Measurement	Testing Value
Density	GB/T 1033	g/cm³	1.40
Surface Resistance	GB/T 1410	Ω/square	10⁷-10⁹
Tensile strength	GB/T 1040	Mpa	33.4
Melting Flow Index	GB/T 3682	g/10min	3.0
Elongation at break	GB/T 1040	%	30
Flexural Strength	GB/T 9341	Mpa	34
Flexural Modulus	GB/T 9341	Mpa	720
Notched IZOD Impact Strength	GB/T 1843	KJ/㎡	11
Heat Conductivity	GB/T 3399	W/(m.k)	0.26
Deflection Temperature	GB/T 1634	℃	145-158
Shore Hardness Tester	GB/T 2411	D	79-82

Application Field:

ESD Products, Spacers & Gears, CNC Machine Processing, Handles, Washers.

Storage Conditions:

Recommended that it is stored indoors, in its original packaging, in a controlled

climate environment, typically at or below 40°C (104°F) and 70% relative humidity.

Product must be protected from exposure to direct sunlight. It is recommended that the product is used on a “first-in, first-out” basis.

Product Image: